Oil futures tumbled more than $5 a barrel on news that the Biden administration is considering releasing about 1 million barrels a day from the U.S. Strategic Petroleum Reserve (SPR) for several months to cool surging crude prices.
Brent crude futures were down $4.71, or 4.2 percent, at $108.58 a barrel by 0035 GMT. U.S. West Texas Intermediate futures fell $5.45, or 5 percent, to $102.74 a barrel.
At an earlier time, gasoline prices had already reached record levels because of the Russia-Ukraine conflict.
The prices of other commodities like the Titanium Nitride TiN are also expected to be volatile.
Overview of Titanium Nitride TiN
Titanium nitride TiN (sometimes called Tinite) is an extremely hard ceramic material commonly used as a coating for titanium alloys, steel, carbide and aluminum parts to improve the surface properties of the substrate.
As a thin coating, TiN is used to harden and protect cutting and sliding surfaces, for decorative purposes (due to its golden appearance), and as a non-toxic exterior for medical implants. In most applications, a coating of less than 5 microns (0.00020 inches) is applied.
TiN has a Vickers hardness of 1800–2100, an elastic modulus of 251 GPa, a thermal expansion coefficient of 9.35 × 10-6 K-1, and a superconducting transition temperature of 5.6 K. In normal atmosphere, TiN oxidizes at 800 °C. TiN is brown in color and golden when used as a coating. According to laboratory tests, it is chemically stable at 20°C, but it is slowly attacked by concentrated acid solutions as the temperature increases. The coefficient of friction of TiN to another TiN surface (unlubricated) ranges from 0.4 to 0.9, depending on the substrate and surface finish. Typical TiN formation has a NaCl-type crystal structure with a stoichiometric ratio of about 1:1; however, TiN x compounds with x ranging from 0.6 to 1.2 are thermodynamically stable. TiN becomes superconducting at low temperature, and the critical temperature of single crystal is as high as 6.0 K. Superconductivity in thin-film TiN has been extensively studied, and its superconductivity properties vary from sample preparation to complete suppression of superconductivity at the superconductor-insulator transition. The TiN film was cooled to near absolute zero, turning it into the first known superinsulator, with a sudden 100,000-fold increase in resistance.
Application of Titanium Nitride TiN
A well-known use of TiN coatings is for edge retention and corrosion resistance in machine tools such as drills and milling cutters, often increasing their lifespan by a factor of three or more. Due to the metallic gold color of TiN, it is used to decorate the coating of costume jewelry and automotive trim. TiN is also widely used as a top coat, typically on nickel (Ni) or chrome (Cr) plated substrates for consumer sanitary equipment and door hardware. As a coating, it is used in aerospace and military applications to protect the sliding surfaces of bicycle and motorcycle suspension forks and the shock shafts of radio-controlled automobiles. TiN is also used as a coating for the moving parts of many rifles and semi-automatic firearms. Protective coating as it is very durable. In addition to being durable, it is also very smooth, making it very easy to remove carbon deposits. TiN is non-toxic, complies with FDA guidelines, and has applications in medical devices such as scalpel blades and orthopedic bone saw blades, where sharpness and edge retention are important. TiN coatings are also used to implant prostheses (especially hip replacement implants) and other medical implants.
Although less obvious, TiN films are also used in microelectronics, where they act as conductive connections between active devices and metal contacts used to operate circuits, while acting as a diffusion barrier to prevent metal from diffusing into silicon. In this case, TiN is classified as a "barrier metal" (resistivity ~25 µΩ cm), although it is clearly a ceramic from a chemical or mechanical behavioral point of view. Recent chip designs using 45 nm technology and beyond also use TiN as the "metal" to improve transistor performance. Combined with gate dielectrics with higher dielectric constants (such as HfSiO) compared to standard SiO 2, gate lengths can be reduced while having low leakage, higher drive currents, and equal or better threshold voltages. In addition, TiN films are currently being considered for coating zirconium alloys for fault-tolerant nuclear fuels. Due to their high biostability, TiN layers can also be used as electrodes in bioelectronic applications, such as in smart implants or in vivo biosensors that must withstand severe corrosion caused by bodily fluids. TiN electrodes have been used in subretinal prosthesis projects as well as in biomedical microelectromechanical systems (BioMEMS).
Titanium Nitride TiN Price
The price of titanium nitride TiN products will change randomly with the production cost, transportation cost, international situation, market supply and demand and other factors of titanium nitride TiN products. Tanki New Materials Co., Ltd. aims to help various industries and chemical wholesalers find high-quality products, customized services, low-cost nanomaterials and chemicals by providing a full range of customized solutions. If you are looking for Titanium Nitride TiN products, please feel free to send an inquiry to get the latest Titanium Nitride TiN prices.
Titanium Nitride TiN Supplier
As a global titanium nitride supplier, Tanki New Materials Co., Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (titanium nitride, silicon nitride, titanium nitride, etc.) high-purity targets, functional ceramics and structural devices, and provides OEM services.
|Technical Parameter of Titanium Nitride TiN powder:|
|Product Name||MF||Purity||Particle Size||Specific Surface Area||Volume Density||Crystal Form||Color|
|( m2/g )||( g/cm3 )|
|Titanium Nitride||TiN||99%||1-3um, 5-10um||7.39||0.19||Spherical||Gray-black|
|Chemical Composition of Titanium Nitride TiN powder:|
Researchers at the University of Warwick in the UK have developed a lithium battery technology innovation. Adding graphene beams doubles battery life. By strengthening the structure of the anode with graphene beams, they have found an effective way to replace the graphite in the anode with silicon. Thereby increasing the capacity of the lithium-ion battery and more than doubling the lifespan.
Molybdenum carbide Mo2C is a new functional material with high melting point and hardness, good thermal and mechanical stability, and good corrosion resistance. It has been widely used in high temperature resistance, friction resistance, chemical cor…
Diamond nanopowder is the hardest material known. The industrial production of nanoscale diamond is carried out under high temperature and pressure. It has been widely used in electronics manufacturing, jewelry, textiles and corrosion-resistant coati…
Inconel 718 alloys is a precipitation-hardening nickel-iron-based superalloy containing niobium and molybdenum. Its microstructure is austenite and has excellent comprehensive properties.…